Industrial Pumps and Water Treatment Systems
Equipment selection for the required flow and head (Q/H), operating conditions and budget. One team coordinates supply, service and foreign trade support, from the RFQ to on-site commissioning. Six equipment groups, manufacturers from the EU, Türkiye and China, alternative products and local service. Scope and availability are confirmed for each enquiry.
6 working groups for real tasks
Each group is a separate page with technical frameworks, running positions, typical errors and examples of deliveries. Click to go to details.

Centrifugal pumps
Horizontal, vertical in-line, multi-stage, cantilever-monoblock. The basis of water supply, heating, process water. Operating points from 5 to 1200 m³/h, pressure up to 200 m.

Dosing pumps
Diaphragm with electromagnetic drive and plunger. Reagents, hypochlorite, acids and alkalis, flocculants, inhibitors. Dosing accuracy ±1%, control 4-20 mA, ProfiBus, EtherCAT.

Submersible pumps
Boreholes 4″ and 6″, drainage, slurry. Depth up to 200 m, with protection against dry running, stainless flow part, possibility of working with abrasive up to 50 g/m³.

Sewage and slurry pumps
With a free passage of 50-100 mm or with a cutting mechanism, abrasion-resistant alloys HB 500-650 for quarry slurries. KNS fiberglass turnkey.

Water filtration and purification
Mechanical filters, ionite softeners, reverse osmosis, ultrafiltration, reagent dosing, UV disinfection. Technological scheme for your water and requirements.

Booster pumping stations
Cascade of 2-6 pumps with frequency drive, hydraulic accumulator and control cabinet. Pumping for houses, factories, fire protection systems. Factory assembly, installation in one day.

KVPiA for water
Electromagnetic and ultrasonic flowmeters, pressure and level sensors, pH, conductivity, turbidity, chlorine analyzer stations. SCADA integration via 4-20 mA and Modbus.
RFQ checklist: nine fields that save a week of correspondence
If you have these nine parameters, the selection of the aggregate is done in one or two days. The rest (manufacturer, brand, series) is on the B2B.engineer side.
1–4. Hydraulics and environment
| Operating point Q / H | Consumption in m³/h and pressure in meters. If only the pipe and pressure in the network are known, give them, we will calculate it ourselves. |
| Environment | Drinking, technological, waste water, sediment, aggressive chemistry, food raw materials — name, concentration, temperature. |
| Density and viscosity | For non-standard environments. For water - skip. |
| Abrasive, impurities | Solid particles in g/m³, size, nature (sand, silt, scale). |
5–9. Electricity, integration, supply
| Voltage and control | 3×400 V / 230 V, frequency drive required, cabinet length cable. |
| Materials of the flow part | Cast iron, bronze, SS304 / SS316, duplex, plastics PP / PVDF. |
| Execution and class of protection | IP55 / IP68, execution Ex (zones 1/21, 2/22), painting according to the customer. |
| Integration | Modbus RTU / TCP, ProfiBus, analog 4-20 mA, sukd-logic, AMS. |
| Place and term | City of delivery, desired term, Incoterms (FCA / DAP / DDP), need for general assembly. |
Typical Industry Applications
Are you entering the market of Ukraine with pumping equipment?
If you are a pump manufacturer or distributor who wants to expand the geography - we work as your external commercial team. We close local tenders, conduct technical consultation, keep a warehouse of spare parts and chief assembly under your brand or under ours.
FAQ: What is asked before the first RFQ
What is the minimum required for you to select a pump?
Operating point Q/H, type and temperature of medium, presence of abrasive or aggressive chemicals, available voltage, material requirements and protection class. If any of this is unknown, the engineer will help determine it from the questionnaire.
Can pumps be tendered by Prozorro?
Yes. We prepare the tender specification, confirm the conformity of analogues, draw up VED, UKTZED 8413, permit documents, delivery of DAP/DDP to the customer's site.
Do you make an analog instead of an unavailable original?
Yes — with justification for replacement: materials, hydraulic characteristics, efficiency, resource, service. The analog should fully cover the operating point and operation.
How long does a turnkey delivery take?
Typically 6-12 weeks from confirmed RFQ to DAP. Dosing pumps and simple centrifugal pumps - faster, complex stations with VED, frequency drive and strapping - longer.
What manufacturers do you work with?
With leading European, Turkish and Chinese manufacturers. The specific choice depends on the technical equipment and the budget. If you need an original - we take the original, if you need a budget analog with a guarantee - there are proven alternatives.
Is it possible to order general assembly and commissioning?
Yes. If the equipment needs leveling with the foundation, adjusting the frequency drive, strapping or checking the hydraulic point, we have an engineering team to do it.
Inputs for an accurate equipment selection
Start with these details. Mark any unknown requirement in your enquiry so it can be clarified before a model is selected.
Check the full order code, contents, technical compliance, exclusions, documents, warranty terms and lead time in the offer. Price and availability are confirmed for your order.
Prepare an equipment enquiryThe form opens with the topic and your checklist. Nothing is sent until you submit it.