Skip to content
Equipment selection. International supply.
B2B.engineerUSK ENERGY
044 339-50-20Call us
UKTZED 8425 · Subgroup 05

Electric Hoists, Cranes, Bridge and Gantry Cranes

Artificial movement of goods in the workshop and on the site. We select by load capacity, span width, lifting height, operating mode. Tali - for small artificial operations. Crane beams - for routine movements in the workshop. Overhead cranes - for heavy operations with long spans. Kozlovi - for platforms without a ceiling.

0.5-50 tcarrying capacity
3-35 mspan
1M-5Mmode of operation
Equipment-type illustration: Electric Hoists, Cranes, Bridge and Gantry Cranes

Hoist is a lifting mechanism (chain or rope) that lifts and moves the load along the monorail. The crane-beam is the entire structure: a beam with a span, which a hoist or trolley travels over the workshop, supported or suspended. The hoist is purchased for the existing crane beam or monorail, the crane beam is designed for the span, lifting height and operating mode group M3-M6.

Electric chain hoist on a crane beam in a production workshop · photo: Cemrecan Yurtman / Pexels
Types & Configurations

Types & Configurations

Each type is a separate range of parameters and its own task. A wrong choice here leads to overspending or downtime.

Electric hoistsBasic for cableways, monorails, artificial operations. Simple installation and maintenance.Analogues: Demag DH · Stahl SH · ABUS GM · Konecranes CXT
Crane beams supportStandard workshop cranes with a span of 5-15 m. They rest on two-sided rails, better clearance under the crane.Analogues: ABUS ELK · Demag EOT · STAHL EVS · Konecranes SMARTON
Suspended crane beamsThey are suspended from the ceiling beams, the span is 5-12 m. They are mounted more cheaply, for buildings without columns.Analogues: Demag EKDR · ABUS EHE · Stahl
Two-beam bridgesLarge workshop cranes, span 15-35 m, load capacity up to 50 t. For heavy engineering, metallurgy.Analogues: Demag EZDR · ABUS DLV · Konecranes UNITON
Trestle and cantilever trestleOutdoor work sites, warehouses of metal and building materials. No need for a building ceiling.Analogues: Demag GZTR · ABUS · Konecranes
What to Ask in RFQ

Parameters Without Which Selection Does Not Start

Carrying capacityt, on the hook. Taking into account the weight of the cargo + traverse.
Flightm, between columns or rails. For supporting 5-35 m, for suspended up to 12 m.
Lift heightm, from the floor to the hook. It depends on the height of the building and the crane beam.
Mode of operation1M (light, 1-2 operations/h) - 5M (heavy, continuous). Affects the structure and resource.
Control typeFrom the remote control on the cable, remote radio, from the operator's cabin (for large cranes).
Where Delivery Works

Typical Applications

Machine building shopSupport crane beam 5-10 t, span 10-15 m, for maintenance of machines and warehouse.
Metallurgy and foundryTwo-beam bridge 20-50 t with a special grab or an electromagnet.
Metal compositionsA gantry crane on a site without a ceiling, span 12-25 m.
Production of wind turbines/SolarSpecial cranes for assembling transformers, installation of heavy components.
Market Overview

What is Actually Ordered in Ukraine

European leaders of lifting equipment: Demag (Germany), ABUS (Germany), Konecranes (Finland), Stahl (Germany) - a standard for responsible and difficult tasks, especially in metallurgy, mechanical engineering, energy. Ukrainian manufacturers hold a significant share in typical workshop crane beams and hoists at the best price. Polish (POŁBEX), Turkish (ÜZGÜR) - middle segment. Chinese (XCMG, KAS) - budget with a 2-3-year warranty. The key when choosing is the correct calculation of the operating mode (FEM ISO) and the reserve for the load capacity.

Chain hoist or cable: the difference is in resource, and not only in price

Both lift the load vertically, but are designed for different load capacities, heights and work intensity.

Chain electric hoist — compact, cheaper, easier to maintain: a calibrated welded chain of strength class 8 or 10 is wound on a sprocket. The practical limit of carrying capacity is approximately 20-25 tons, and the lifting height is limited by the weight and volume of the chain itself: a long chain weighs and does not fit into a standard chain box. The resource determines the elongation of the link: when the pitch of the chain exceeds the passport tolerance, the chain is rejected regardless of appearance.

The rope electric hoist uses a steel rope on a drum and can withstand higher load capacities - up to 50-100 t in a heavy version, higher lifting heights and higher speed. Multiple rope storage (2/1, 4/1, 4/2) allows you to flexibly change the ratio of speed and carrying capacity on one drum. The resource of the rope is controlled by the number of broken wires along the length of the step of the bend — the failure criterion is written in the passport, and not determined by eye.

In practice: light and medium tasks with a small lifting height — chain hoist, more profitable and easier to repair. Large load capacities, significant lifting height or heavy duty mode (group M6 and above) - rope, because the chain of this class either does not exist or is unreasonably heavy.

FEM/ISO Mode Groups: What M3-M6 Mean

The old 1M-5M system and the modern FEM/ISO are not two different standards, but two designations of the same principle.

Group FEM/ISOTypical applicationEstimated intensityAn example of an object
1Bm / M3Infrequent climbs, light compositionup to 2 hours of operation of the mechanism/dayassembly workshop, spare parts warehouse
1Am / M4Regular but not continuous operationsup to 4 hours/dayworkshop for small-scale production
2m / M5Standard workshop modeup to 6-8 hours/daymechanical assembly shop, repair station
3m / M6Intensive, almost continuous workup to 16 h/daymass production, transshipment terminal

Span, lift height, and building height are three confusing dimensions

Span is the distance between the rails or supports along which the crane bridge travels; for supporting crane beams, this is the distance between columns, for suspended ones - between roof beams. Lift height is the working stroke of the hook, from the lower working point (usually the floor) to the upper. These two parameters are in any TK.

Building height is the most often forgotten parameter, which determines whether the beam crane will fit under the existing ceiling. This is the distance from the top lifting point of the hook to the bottom of the crane beam or monorail: this includes the dimensions of the trolley or hoist itself, which physically cannot raise the hook higher than its body. If the workshop has a low ceiling, and the customer has calculated only the required lifting height without the building height, the crane-beam during installation does not reach the hook for the last 40-60 cm, and this is already found out at the site.

What are the criteria for choosing a beam or a crane beam?

Carrying capacity with margin

Not only the weight of the cargo is counted, but also the crossbars, slings, containers — a typical reserve of 10-15% of the nominal lifting weight.

Lifting height and building height together

Separately from each other, these parameters are misleading - the finished mechanism may not physically reach the hook to the desired point under the existing ceiling.

Operating Mode Group vs. Actual Intensity

An underrated group means premature wear of the mechanism; overpriced — overpaying for features that will never be used.

Control type

Cable remote control for liquid operations, radio control for operator mobility, cab only for large overhead cranes with poor visibility from below.

Compatibility with the existing under-crane track

Replacing the hoist with a new model without checking the profile of the rail and the width of the track is a typical reason why the finished unit does not fit into place.

PB and registration with State Labor: what is needed before starting the crane

Girder cranes, bridge and gantry cranes belong to high-risk equipment, therefore, before commissioning, the enterprise submits a declaration of compliance of the material and technical base with the requirements of the legislation on industrial safety (PB) to the territorial body of State Labor. Without a registered declaration, operation of the crane is formally illegal, even if the mechanism is new and in good working order.

A passport is created for each crane (with technical characteristics, stocking scheme, documents for metal and welds), and before the first start-up and periodically thereafter, a technical inspection is carried out - its results are entered in the same passport. Separately, licensed personnel are required: the crane operator and slinger must be trained and licensed, otherwise the finished and registered crane still cannot be legally operated.

What is most often missed in the TK on the hoist or crane beam

Control type

They forget to specify the remote control, radio or cabin - the supplier sets the cheapest option by default, which then has to be changed.

Building height

Only the height of the hook lift is counted, forgetting about the dimensions of the cart itself or the hoist above it.

Environmental conditions

Explosive dust, high humidity or street installation of a gantry crane must be specified separately - the standard implementation will not withstand this.

Limit switches and buffers

Without trolley and bridge travel limiters, the very first failure of the operator ends with hitting the end of the track.

Compatibility with existing track

Replacing one hoist or crane beam with a new model without dimensions of the existing rail is a typical reason why the unit does not fit on the installation.

Frequently Asked Questions

FAQ

Support or hanging crane beam?

Support is a standard for a new building with ready-made crane ways. Suspended - for existing buildings, where a crane is added without reconstruction. The support is more powerful, the suspension is simpler.

What is the operating mode for a 5 t crane beam in the shop?

Usually 2M-3M (average). 1M - if the operation is performed once or twice per shift (warehouse). 4M-5M - if continuous work (metallurgy, mass production).

How much is a 5 ton beam crane with a span of 15 m?

Include the model or specifications, quantity and delivery location. We will confirm price, availability and lead time in our reply.

Do you do installation and commissioning?

Yes. The manufacturer's engineer or our specialist on site. Load testing (1.25× nominal), technical acceptance, transfer to the customer with documents.

How does a hoist differ from a crane beam and which of them do you need?

The hoist is the lifting mechanism itself (chain or cable), which pulls the load up and down and travels along the beam. The crane beam is the entire structure: a beam with a span, supported on columns or suspended from the ceiling, by which this hoist is moved along the workshop. If you already have a monorail or crane beam and the mechanism has failed, you need a hoist. If there is no structure itself, you need a crane beam with a beam in the kit.

How does a chain hoist differ from a rope hoist in terms of resource?

The chain hoist is rejected due to the elongation of the link beyond the passport tolerance and is practically limited by the load capacity up to 20-25 t and the small lifting height due to the weight of the chain itself. The rope hoist can withstand greater load capacities and heights, and its resource is determined by the number of breaks in the rope wires along the length of the winding step. With the same intensive mode, the rope hoist is usually more durable, the chain hoist is cheaper and easier to repair.

What do the M3-M6 operating mode groups mean and how do they differ from the old designation 1M-5M?

M3-M6 (modern FEM/ISO classification) and the old 1M-5M describe the same idea — the intensity and duration of use of the mechanism per day — but on different scales of designations, so a direct comparison is better to check in the manufacturer's passport. In practice, M3-M4 (1M-2M) are infrequent warehouse operations, M5-M6 (3M-4M) are workshop and almost continuous production mode.

What is PB and is it necessary to register a hoist or a crane beam in the State Labor Office?

PB — industrial safety: crane beams and bridge cranes belong to high-risk equipment, therefore the enterprise submits a declaration of compliance of the material and technical base with the requirements of PB to the territorial body of State Labor even before commissioning. In addition, a technical passport of the crane, a periodic technical inspection and trained personnel (crane operator, slinger) with a permit are required - without this, operation is formally illegal.

How does the span differ from the construction height when selecting a crane beam?

Span is the horizontal distance between the rails or support beams along which the crane bridge travels. Building height is a vertical parameter: the distance from the upper point of hook lifting to the bottom of the crane track, which takes into account the dimensions of the cart or hoist itself. Confusion of these two parameters is a typical reason why the mounted crane beam does not reach the hook for the last tens of centimeters under the existing ceiling.

Will the existing building frame support a suspended girder crane without reinforcement?

It depends on the load-bearing capacity of the roof beams, under which the crane-beam is suspended, the designer calculates the load from the crane's own weight plus the load plus dynamic coefficients from acceleration and braking. For old buildings or light metal structures, reinforcement is almost always required; the exact answer is given only by a verification calculation according to the design documentation of the building, not a visual assessment.

A gantry crane or a support crane-beam on an overpass — which is more profitable for an open site?

A gantry crane does not require a building or support columns - its own support legs stand directly on the site, so it is a typical choice for open warehouses of metal or building materials. A supporting crane-beam on the overpass is appropriate if the overpass is already being built for other needs; building it just for the sake of the crane is usually more expensive than a gantry crane of the same load capacity and span.

What is the standard electric hoist designed for lifting height?

Catalog electric hoists usually offer a standard lifting height of 6, 12, or 18 m — under a typical workshop height. Greater lifting height is made to order and is practically unlimited for rope hoists, for chain hoists it is limited by the weight and volume of the chain box. In the specification, the lifting height is indicated separately from the workshop height — these are different parameters that are often confused.

BUYER’S BRIEF

Inputs for an accurate equipment selection

Start with these details. Mark any unknown requirement in your enquiry so it can be clarified before a model is selected.

Select the information you already have

Check the full order code, contents, technical compliance, exclusions, documents, warranty terms and lead time in the offer. Price and availability are confirmed for your order.

Prepare an equipment enquiry

The form opens with the topic and your checklist. Nothing is sent until you submit it.

USK Energy

Find the right equipment

Leave your contact details. A manager will clarify the specifications and prepare a quotation.

Or contact us directly: sales@usk.ua · 044 339-50-20