Variable frequency drives: energy saving and control
The financial benefit depends on the duty cycle, load profile and existing equipment. A comparison requires operating parameters, annual running hours and site conditions. Calculate consumption and payback for the agreed configurations.

Types & Configurations
Each type is a separate range of parameters and its own task. A wrong choice here leads to overspending or downtime.
Parameters Without Which Selection Does Not Start
| Power | kW, taking into account starting moments and a margin of 20-30%. |
| Load type | Constant (conveyor), quadratic (pump, fan), shock (press, crusher). |
| Overload capacity | 150% for 1 min for normal, 200% for 2-3 sec for heavy mode. |
| Harmonics | Standard THDi 40-50%, with filter 5-10%, active rectifier 3-5%. |
| Integration | Profibus, Profinet, EtherCAT, Modbus for communication with PLC. |
Typical Applications
What is Actually Ordered in Ukraine
FAQ
How to choose the power of the frequency drive?
We proceed from the nominal power of the engine, the type of load and the starting torque. For centrifugal pumps - exactly nominal. For presses and compressors - +25-40% reserve due to starting and peak loads.
Do you need a choke or harmonic filter?
Yes, if the network is sensitive to harmonics (other electronic consumers, UPS). The choke is installed on the input, the harmonics filter is for critical objects.
How much does a 55 kW VFD cost?
Include the model or specifications, quantity and delivery location. We will confirm price, availability and lead time in our reply.
Can multiple motors be controlled by a single VFD?
2-3 parallel motors of the same type are possible through a common VFD with proper cable cross-section and protection. Not recommended for responsible facilities - separate VFD for each motor.