Skip to content
Equipment selection. International supply.
B2B.engineerUSK ENERGY
044 339-50-20Call us
UKTZED 8517 · Subgroup 06

Industrial switches, gateways and protocol converters

Industrial networking is the foundation of SCADA, executive systems, and telemetry. Ordinary office switches do not survive in the workshop: humidity, temperature, vibrations and EMI fail. We select managed Layer 2/3 switches with an operating temperature of −40 °C to +75 °C, Modbus RTU/TCP protocol converters, PROFINET, EtherNet/IP, EtherCAT gateways, cable equipment and backup power for critical areas.

Equipment-type illustration: Industrial switches, gateways and protocol converters

Technical parameters

Number of ports
5 / 8 / 16 / 24
Speed
100 Mbit / 1 GbE / 10 GbE
Type of ports
RJ45, SFP, SC, ST
Working temperature
−40 °C … +75 °C
Protection
IP30 / IP67
Reservation
ERPS, MRP, RSTP

Why is an industrial network more expensive than an office network

Industrial switches have a metal case, DIN-rail mounting, dual 24 V power supply, surge protection, attention to EMI. All this leads to a price 5-10 times higher than the office equivalent — but it serves for 10+ years even in a metallurgical shop. Savings on office equipment usually ends with a seasonal reset of the entire site.

Network redundancy: ERPS, MRP, RSTP

For critical areas (for example, a conveyor with a security system), we use a ring topology with ERPS or MRP protocols, which switch the backup path in 50 ms. RSTP is the standard, but slower (1-2 seconds). These protocols are mandatory in water treatment and energy facilities.

Converters and gateways: when needed

If you have an old system on Modbus RTU, and the new SCADA requires OPC UA, you need a Modbus → OPC UA converter. If your line is Siemens (PROFINET) and new devices are on EtherNet/IP, you need a gateway. We match exactly to your stack, without overpaying for extra features.

Frequently Asked Questions

Can office switches be used for initial savings?

It is possible, but count the losses: a typical simple line due to the failure of an office switch in the workshop — 4-8 hours, which is more expensive than the entire industrial network. If you do not have a critical circuit (only temperature monitoring in the office), the office circuit is suitable.

What brands do we typically offer?

Hirschmann (Belden), Moxa, Siemens Scalance, Phoenix Contact, Westermo, Advantech, Korenix. Analogues — Lapp, MEN. All have a service network in Ukraine.

How long does delivery take?

Serial items — 4-8 weeks from order to DAP to Ukraine. Configurable reserved groups — 8-12 weeks.

Are you making adjustments?

Yes, in the VIP package. Basic configuration (VLAN, port statistics, access control) is included in the project. More complicated — SCADA integration, OPC UA, backup protocols — a separate service of an engineer.